Gas Cylinder Cages
Are you looking for a safe way to lift your cylinders? Then our Gas Cylinder Cages are what you need. Our cages complies to the OSHA regulation code 1926.350 (a) (10) which states that the cage must have a five foot firewall with a 30 minute burn through time.The cage comes with Marinite fireboard CS85 which has been tested by our supplier to meet OSHA regulation of a 30 minute burn through time at temperature of 1600 degrees. Documentation papers of proof of test are available. The cages are not only accessible by crane but also by forklift.The ratchet straps inside the cage make securing cylinders very easy and safe.
Models Specifications:
C-2 MFW
CUSTOM CAGE GAS CYLINDER CAGE MODEL C-2MFW
SPECIFICATIONS:
- Designed to meet or exceed all State and Federal OSHA Regulations.
- AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
- Each Custom Cage is load tested.
- Inspection and load test certification supplied.
- Two year warranty.
- Dimensions: 36” x 20” x 72” high outside.
- Working load limit 500 lbs.
- Holds 2 standard size cylinders
- 1 1/2″ square tubing design.
- Floor – non slip diamond plate.
- E-track strapping to secure cylinders
- Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR – 1926.350(a)(10).
- Outward swinging gate on one 36” side with drop pin latch.
- Ramp below gate for easy loading of your cylinders.
- Single pick point
- Fork pockets 3″x8″x3/16″
- Finish – Electrostatic powder coat finish – safety yellow.
- Safety warning decals and permanent non corrosive ID plate.
- Fully covered by product liability insurance.
C-624
CUSTOM CAGE C-624 GAS CYLINDER CAGE
SPECIFICATIONS:
- Designed to meet or exceed all State and Federal OSHA Regulations.
- AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
- Each Custom Cage is load tested.
- Inspection and load test certification supplied.
- Two year warranty.
- Dimensions: 26” x 46” x 72” high.
- Working load limit 2,000 lbs.
- Holds 8 – 9” diameter cylinders
- 1 1/2″ square tubing design.
- 6” Steel continuous toe plate.
- CS85 Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR -1926.350(a)(10).
- The only marinite fire wall that has been tested to a 30 minute burn through time at temperature of 1600 degrees. Third party documentation papers of proof test are available.
- Floor – non slip diamond plate.
- Ratchet straps to secure cylinders
- 4 lifting eyes for bridle suspension.
- Fork lift tubes 3″x6″ – 38″ outside.
- Outward swinging gates on both ends with drop pin latch. *Finish – Electrostatic powder coat finish – safety yellow. *Safety warning decals and permanent non corrosive ID plate. *Fully covered by product liability insurance.
C-624M
CUSTOM CAGE C-624M GAS CYLINDER CAGE
SPECIFICATIONS:
- Designed to meet or exceed all State and Federal OSHA Regulations.
- AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth. *Each Custom Cage is load tested.
- Inspection and load test certification supplied.
- Two year warranty.
- Dimensions: 28” x 54” x 72” high. (Outside dim.)
- Working load limit 2,000 lbs.
- Holds 8 cylinders
- 2″ square tubing design.
- 6” Steel continuous toe plate.
- Floor – non slip diamond plate.
- Ratchet straps to secure cylinders
- Single pick point.
- Fork lift tubes 3″x6″ – 38″ outside.
- Outward swinging gates one both ends with drop pin latch.
- Finish – Electrostatic powder coat finish – Safety yellow.
- Safety warning decals and permanent non corrosive ID plate.
- Fully covered by product liability insurance.
C-4FE MFW CUSTOM GAS CYLINDER CAGE
Custom Cage Gas Cylinder Cage Model C-4FE MFW
SPECIFICATIONS:
- Designed to meet or exceed all State and Federal OSHA Regulations.
- AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
- Each Custom Cage is load tested.
- Inspection and load test certification supplied.
- Two year warranty.
- Dimensions: 52” x 20” x 72” high outside.
- Working load limit 1,000 lbs.
- Holds 4 cylinders
- 2″ square tubing design.
- Sides enclosed with #9 expanded metal.
- Floor – non slip diamond plate.
- CS85 Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR – 1926.350(a)(10).
- Cylinders are secure with ratchet strapping
- Solid steel roof with a Single pick point.
- Outward swinging lockable gate on one side with drop pin latch.
- Finish – Electrostatic powder coat finish – safety yellow.
- Safety warning decals and permanent non corrosive ID plate.
- Fully covered by product liability insurance.
C-6FE CUSTOM GAS CYLINDER CAGE
CUSTOM CAGE C-6FE GAS CYLINDER CAGE
SPECIFICATIONS:
- Designed to meet or exceed all State and Federal OSHA Regulations.
- AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
- Each Custom Cage is load tested.
- Inspection and load test certification supplied.
- Two year warranty.
- Dimensions: 34” x 34” x 72” high outside.
- Working load limit 1,250 lbs.
- Holds 6 cylinders
- 2″ square tubing design.
- Sides enclosed with #9 expanded metal.
- Floor – non slip diamond plate.
- E-track strapping to secure cylinders
- Solid steel roof with a Single pick point.
- Fork lift tubes 3″x6″x1/8”.
- Outward swinging lockable gate on one side with drop pin latch.
- Ramp below gate for easy loading of your cylinders.
- Finish – Electrostatic powder coat finish – safety yellow.
- Safety warning decals and permanent non corrosive ID plate.
- Fully covered by product liability insurance.
C-12FE
CUSTOM CAGE C-12FE GAS CYLINDER CAGE
SPECIFICATIONS:
- Designed to meet or exceed all State and Federal OSHA Regulations.
- AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth. *Each Custom Cage is load tested.
- Inspection and load test certification supplied.
- Two year warranty.
- Dimensions: 44” x 34” x 75” high outside.
- Working load limit 2,500 lbs.
- Holds 12 cylinders
- 2″ square tubing design.
- Sides enclosed with #9 expanded metal.
- Floor – non slip diamond plate.
- E-track strapping to secure cylinders
- Solid steel roof with a Single pick point.
- Fork lift tubes 3″x6″x1/8” – 34” apart outside.
- Outward swinging lockable gate on one side with drop pin latch.
- Ramp below gate for easy loading & unloading cylinders.
- Finish – Electrostatic powder coat finish – Safety yellow.
- Safety warning decals and permanent non corrosive ID plate.
- Fully covered by product liability insurance.
Photo Gallery
Custom Gas Cylinder Cages
-
C-624
-
C-624M
-
C-4FE MFW CUSTOM GAS CYLINDER CAGE
-
C-6FE CUSTOM GAS CYLINDER CAGE
-
C-12FE
-
C-2 MFW GAS CYLINDER CAGE Dimensions: 36” x 20” x 72” high *Working load limit 500 lbs. *Holds 2 cylinders
Call Toll free @ 1-888-265-1777 or 920-793-2680
Got Questions?
Email Us Today!
lakeshoreind@lsol.net
